Roto Hammer Floor Stands offer convenient, manual control of below ground valves. The Floor Stands can be installed at ground, slab or floor level and can be made for both rising and non-rising stem valves. These Floor Stands are available with or without valve position indicators.
CAUTION:
Provisions must be made to prevent the HANDWHEEL RETAINING NUT FROM BACKING OFF whenever a chain wheel is installed. To insure safe operations, Roto Hammer recommends that thorough inspection of all chain operated valves be performed as a routine part of the user’s Safety/Maintenance Schedule. Set screws and other threaded fasteners MUST be secure and tight.
In addition, it is strongly recommended that an appropriately sized Roto Hammer RCK Safety Cable Kit (optional) be installed on every overhead chain wheel operated valve.
| Item No. | Wheel Size | Weight | Turns to Open | Material |
|---|---|---|---|---|
| FS100-4 | 101 mm (4”) | 28.12 kg (62 lbs) | 30 | Cast Iron |
| FS100-6 | 152 mm (6”) | 29.03 kg (64 lbs) | 30 | Cast Iron |
| FS100-9 | 229 mm (9”) | 30.84 kg (68 lbs) | 30 | Cast Iron |
| FS100-12 | 305 mm (12”) | 33.57 kg (74 lbs) | 30 | Cast Iron |
| FS6-30-12 | 305 mm (12”) | 69.40 kg (153 lbs) | 120 | Cast Iron |
| FS6-30-15 | 381 mm (15”) | 71.67 kg (158 lbs) | 120 | Cast Iron |
| FS6-30-18 | 457 mm (18”) | 70.76 kg (156 lbs) | 120 | Cast Iron |
| FS6-30-24 | 610 mm (24”) | 75.30 kg (166 lbs) | 120 | Cast Iron |
| FS6-30-30 | 762 mm (30”) | 76.66 kg (169 lbs) | 120 | Cast Iron |
| FS6-30-36 | 914 mm (36”) | 78.02 kg (172 lbs) | 120 | Cast Iron |